Well for a paid site, these annoying and continuous DNA advertising offers/tree limit warnings (upgrade to Premium Plus offers) are pretty annoying for me. What about your opinion? Because web could not remember that I closed this offers hundreds of times before I must set up Adblock rule for that:
I just spent a week researching and adding new 500 profiles to my online tree and updating countless existing profiles. I sync'd it with Family Builder and instead of adding the new data to Family Builder, the sync reversed all of the changes that I've made.
Of course, tech support isn't open and I'm beside myself. Does anyone have any experience with this? Does myHeritage do running backups so they can restore my tree? It had over 7,200 entries. and now has less than 6700. It's not just the time to type in 500 new profiles (which is a LOT) and edit countless other profiles, but I don't think I can retrace my steps in finding all of that data.
I really hope someone checks the forums this weekend and can reassure me that all of my data will be restored.
I apologize in advance for the very long message that follows, but MyHeritage Support seems unable to help, so I’m hoping that other users might have suggestions.
In early October, when I tried to open my on-line My Heritage tree, I received a surprising pop-up message that said “An error has occurred. Please try again later.” I tried again several more times over the following days, but the result was the same. Interestingly, my family tree was still listed under the Manage Trees tab, but it would not open. In addition, I discovered that all of my Smart Matches were still listed under the Discoveries/Smart matches tab, including those Matches I had previously confirmed but were still pending by others, as well as matches confirmed by others but awaiting my confirmation, but when I tried to view these matches, there was no actual underlying data for my tree or the matching tree. In other words, My Heritage still seemed to “recognize” my family tree and related Smart Matches, but all the underlying data apparently had become “invisible” or “disconnected”. I contacted My Heritage Support on October 10. On October 19, I received a response, suggesting I clear the internet cache and cookies, which I did but still could not open my tree. Several days later, Support responded, “There is bug for the specific problem you have mentioned. The development team has been notified and they are working to fix this as soon as they can.” In the meantime, Support suggested I try to synch with my Family Tree Builder tree. When I tried this, FTB reported “…family tree not found on My Heritage website…would you like to upload a new tree?” Reluctantly, I proceeded. The result was that I now had two trees with the same name - one listed as sourced from my original GEDCOM file and one sourced from FTB. Interestingly, I could now open both trees, though none of the individual records on either tree showed any Smart Matches. The previous Smart Matches for my original tree (source: GEDCOM) were still listed under the Discoveries/Smart Matches tab though there was still no visible data when I tried to view the Matches. Not surprisingly, the previous Smart Matches did not carry over to my “new” tree (source: FTB). Interestingly, the individual records for both trees retain Record Matches though when I view those Matches, they are no longer listed as “Confirmed”. On a positive note, I do not appear to have lost any individual records or related media files/records. However, it is very frustrating to have lost access to all of my Smart Matches. I would greatly appreciate any ideas that others might be able to offer. Thanks.
In the record matches page when you clisk on the green tick, you go to the page where you can copy data, and then when you return to the match page, the filtering options are not applied - you have to reapply the filtering options after every few green ticks - which is a pain. When you return after having ticked one and copied the data, that mtach should ont now appear if the filter has been set to pending.
The improvements to the "details" pane now makes it very easy to see which person has a Biography Note attached. Thank you, this is a very welcome addition. I think it will make a big difference for people who are interested in Family History - the stories of their family.
Every time I try to generate a genealogy report it comes up with an error message. I did not have any trouble doing it previously so I wanted to know if anyone has had similar trouble amd how did you solve it?
Everything was up and running correctly on the family tree with all photos showing. Then I installed FTB on my computer, and this is THE ONLY COMPUTER WHERE I HAVE FTB, and some of the profile photos aren't synced. They are visible and assigned to the person but do not show up as a profile picture. Oh well. as long as the pictures haven't disappeared.
Then I started getting report that I can't sync the tree and ftb due to duplicate persons. So I tried uninstalling and re-installing ftb. Now only perhaps 50% of the photos show up in FTB while they are visible in the tree... This is not what I am paying 200 euros annually for. What can I do except cancelling the subscription?! And please don't tell me again that I can only have FTB on ONE computer.
My heritage has been a good investment and I am pleased for the most part. However, I am finding duplicates showing up that I never added to my tree. Is this a result of a faulty software in smartmatches or discoveries? Also, once a duplicate appears it seems to be a laborious task to remove them. Any help is appreciated.
Edit: I just went to my home page and discovered that someone is confirming matches that in my name that I have not confirmed! I set my security settings so that folks can look but not touch. How is this happening?
How do I delete duplicate people during record or people matches? Somehow information that is already in MyHeritage tree is not being seen when checking matches. So I end up adding a person and then I later find out it is a duplicate.
Today, I found an entire family as duplication. How do I fix?
for years, I'm expecting some improvements in look of family tree and still nothing. This is the biggest problem of MH. It's too complex and unfriendly. For old people it's chaos. For me it's mess, that's why I prefer FTB.
I would suggest two types of view, one as present and one showing only ancestors of selected person with option to open other siblings. Even same look as in FTB would b awesome.
Next, easiest addition would be button for quick jumping from person to his parents etc. (see attach).
I have to say that Ancestry has it better. Main lines are always in the center.
When editing my "WELCOME" description on Family Site (opening page) .. the "SAVE" link / button does notwork. The "CANCEL" link / button works like a charm. I checked the properties for each of these buttons .. and it states: d.mhcache.com. Something within the software is screwed up. Has anyone else experienced this frustrating issue?? Thanks, Have a pleasant day .. Helen More
Nobody is listening or taking on board my very simple request, what is going on over there????
This has absolutley nothing to have with your Map Provider, all I am asking is to have included is the old spelling names of countries added to your dictionary, just so simple, I just cannot believe that with the technology at hand that this cannot be done, I and thousands of others pay good money to have total acurate records of our ancestors placed online and nobody gives a damm as long as they get paid each week.
How exactly do you make a bug reprot to this company (myhearitage) when their message system for reporting bugs is broken and their telephone line system results in the message "the other person has cleared " as soon as you press the correct option ?
Is MyHeritage in Meltdown ?
There are several bugs that have been there for over ayear now and worryinbgly, nobody seems either able or prepared to fix them.
1) It is still impossible to restore the default welcome message on the family tree intro page
2) FTB version 8 still displays "invalid sync error" when syncing from the program, no matter what the result
3) When trying to post messages to help other users who have incorrectly copied information from my website to theirs, the page asks me to enter an anti-spam code, unfortunately the box with the spam code in it is blank therefore no message can be posted. see attached (if the system doesn't have a bug stopping me from adding the attachment that is )
I finally (after trying for a week) got a successful GEDCOM uploaded and then downloaded into Ancestry.com. Everything but the 1700 photos made the trip. The correct "photos included" button was checked. That was my first experience with GEDCOM. Is there any expectation of a different result with photos surviving with more tries?
What is the best way of adding periods of residency for a person? Say, 1910 - 1915 at Address A.
I know I can add, say, a specific date (for example, Residence -> Census), but rather than that I'd like to add a period with multiple citations to back it up (e.g. multiple censuses, yearly electoral rolls, etc)