The Smart Matches come with whatever subscription you have; not sure about the free limited subscription.
But if you've got a crown you have smart matches.
I have recently subscribed to the My Heritage research add-on (variously named and described) and that is around $10 a month. Gives you a lot of extra information from other programs, notably Geni; also lots of newspaper references and birth certificates and gravesites and such and is worth the extra.
Without checking figures it is probably comparable or nearly in costs and benefits to ancestry (which my wife has and which I have used a lot).
I just received a couple of smart matches that had me intrigued. One is from my husband's side of the family, one is from my own. The problem is that the tree they both are on is incredibly huge, and I can't just "go looking" to see if I find how they are connected. Is there a way to mark these two people to find the relationship (the line) between them?
It might be simpler if you send message to the site manager and ask them to do the calculation between the the two people concerned, giving them all the information that you have on them, so as they can confirm the they are the same people that are in your tree.
This is a matter of your own judgement. If after checking all the information of that matched person, you believe it is irrelevant for you, you can simply reject it.
However, if for instance you find that even a date being incorrect, other informations is relevant such as places of birth and death, the siblings, etc. You can confirm it.
The act of confirming a match will not change the data you have in your own family tree. Only if you actively copy the information, it will change in your tree. So you don't have to worry much about confirming a match that is not 100% accurate to what you think is correct. It can still be valuable for you to have a contact with that other tree to which yours was matched, because you might find in that tree valuable information for your research.
I decided to lash out and pay for the extra smart matching.It is so frustrating as when I add family eg brother,sister ,etc the date changes on the day for the births,marriages and deaths. Three or four times 14 family. Most annoying. Is there somewhere where I can turn this?
I had thought this would be a great way to spend the holiday season but it is so frusting so I have decided to give it a few days rest and will try again or I will probably throw my puter out the door
I have over 200 names 'pending confirmation' but when I go to do a match there is nothing there - just a blank.
It says "Smart Matches™ are currently being processed. Come back to this page soon to check for updates."
I left the computer on all night to see if it would process but no still over 200 to be processed.
I recently edited renamed and deleted trees so as to cut down on duplicate names, could the original names still be wanting to be matched even though names have been deleted?
This is very annoying as I like to keep my smart matches up to date. I now dont know if there are smart matches to be checked. and if there are any, where they are. There are so many showing 'NEW' that I have already gone into, but nothing to match. Please help.
The smart matches are generated when you make a change in your family tree and publish them to your website. The data will then be compared with over 25 million other family trees at MyHeritage . Due to the fact that this takes some time it will take 2-3 of days to collection of the data. Large family tree projects may take a week.
The smart matching technology is very dynamic. It happens that in this "intermediate period" webmasters make changes in their family trees and
remove individual cards and even entire trees. The result is that you have received a message that you have a smart match, but that the data has been removed. The result is an empty smart match.
Also you may wish to know that within the Family tree Builder Software the SmartMatch alorithms work differently to the online fmaily site and the matches are presented later than that on the online fmaily site. The reason is due to a lag in processing Smart Matches.
When you type the information into your tree (In Family tree Builder) we check to see if there are matches "ad-hoc" or "on the fly".
If there is a match, the green icon appears to indicate we've found a preliminary match. The actual matches usually take a few days to be processed (as in the online fmaily site) so if you go to check your matches right away you won't see any, but ideally you should get matches within 2-3 days, and with large trees 1000 persons, it may take 4-7 days.
I have spent the last month or so trying to clear the backlog of matches but as MyHeritage can not cope with the merging of trees without producing duplicates, so if a member uses a different program FTB they can't merge in another GEDCOM file without producing duplicates for every original person, so with no automated means of merge/delete more matches are produced.
The only other alternative is to add yet another tree to your site, and go through the matching process yet again, do this a couple of times and the other member also does this and you end up with an exponential growth in matches,
1 tree = 1 match for the same person
2 trees in each members site = 4 matches for the same two people
3 trees in each members site = 9 matches for the same two people
4 = 16, 5= 25 etc.
Now when checking "Smart Matches" take say take 90 seconds to verify each set, people soon get bored of checking the same thing over and over again, also with the older trees not being updated errors are perpetuated. I my-self have a tree of > 15,000 people that generates in 3,000 trees some 13,000 matches that will take me over 75 man/hours to clear, in the meantime my partner will add about 600 more people to our tree (held in a stand alone progam, MyHeritage is one of several sites that we update)
Some stats on this:
15 trees have matches of >100 people
I still have >1200 trees with one match to confirm
I have >975 trees with confirmed matches
I have rejected and ignored >900 trees
I would be nice if MyHeritage were to develope the software so that I can get out of this perpetual treadmill of validating "Smart Matches"(sic) some 50% of which I have to reject. This developement needs to merge a new GEDCOM file with all my updates with an older tree, without producing duplicates for every original person, and/or an automated means of merge/delete.
What is the experience of other user with large trees?
Firstly a beginner in here and only just commenced my own tree going back though my parents and Aunts and the tree starts to grow. However I was a bit surprised when I immediately got a Smart Match (SM) which linked myself to my father; bit of a humerous situation I thought and pushed it to one side.
However when I open up my email this morning I see another SM linking my name to my father once again; well hello of course there is a link there because I told the system there was a linkage there when I created the tree. I would have thought that the SM system would be a bit more intuitive and realised that there was no requirement to issue out a SM between father/son relationships..... or maybe I should be directing that at the programmer???
I suspect that you and your father share the same name, and that you have not been too precise in the entry of the date of your birth and his (just the year?) and if there is no difference in the place of your birth and your fathers the matching algorithm thinks that you both the same person :(
This is a tip to all users of MyHeritage / Smart Matching; try to be precise as possible in the entry of "Facts" so as to differentiate your ancestor from everyone else, so if a match is found it should be greater than 65% unique.
Most of my "smart matches" are not a match at all. I have some that are totally different surname, born 100 years apart, and from different places. The only one thing that might be same is the first name - something like JOHN! I reject them, but they are sitting there in my list of related trees. I cannot see a way to delete them. As it is I have only handful of other trees that are related to my own, and the rest is just clattering my site. And the same, totally unrelated, names are getting more and more matches from other trees. I am rapidly loosing interest, and I only have a very small tree; I can imagine what a nightmare it would be once you have so many people.
I also have some "record matches" which are wrong, but to reject those I would have to pay another $120 per year for something I do not want, as my family is not in the USA, and therefore US census and other records are not of interest to me.
When your get Smart Matches for your family tree, we show you ALL of your matches, the high quality matches and the lower quality ones.
The list is sorted by quality, so you’ll see the best matches first, but we also show you the other matches below, so that no information will be hidden, and all your research potential will be met. If you find that a match is wrong (sometimes siblings are matched with each other for example), just mark it as rejected.
Also, you can ignore family trees that are irrelevant, as I explained you in a different Forum post on which you also wrote.
Regarding the Record Matches, there isn't a way to delete them, and you can simply disregard them, if you don't have a Data Subscription and therefore cannot reject them. Nonetheless, in order to receive more accurate Record Matches, you can access the Record Matches page (hover over the "Family tree" tab and click on "Record Matches") and on the top left corner of the matches list click on "Filtering options".
On the window that opens, move the "Matches of the following confidence or higher" bar to the highst accuracy (more stars), so it will show you very few yet very accurate matches.
Record Matches and SuperSearch cover many countries and not only USA. On SuperSearch, where you can manually search for records, you can filter your results in many sorts. Click here to read more about how to use SupeSearch.
Niall, you asked, "What is the experience of other user with large trees?".
Well, I have two screens, which helps. I keep Family Tree Builder on the left screen, with the online SmartMatch page showing in the right. I match with the online screen (unless there are a lot of new family to merge; I do that in FTB SmartMatches using the Merge feature).
Online I choose the tree in the box on the top right, choose People, Last Name, and the page I have got up to. I don't forget that because I write the person's name and the page number in a book.
And then I just work through the whole damn tree alphabetically, looking for the bold type entries that show there are unresolved matches. Still tedious, there are still some weird matches, but it works.
This is a copy of what I wrote earlier with the reply that I privatley got from Laura - who them promptly deleted the orginal Her answers are in red
"11/12/2014 21:52 - Niall SANDERSON wrote:
Does anyone know what the effects are of different stages of rejection.
James Smith b1870 d1942 in your tree is "Smarth Matched" with Jos Smith b1850 d1942 in Joe Bloggs tree
A) you "ignore tree"
1) Does Joe Bloggs know that you have ignored his tree? No.
2) If Joe Bloggs creates another tree with Jos Smith b1850 d1942 are you:-
i) Presented with yet another chance to ignore this match? Yes.
ii) Your first choice of ignoring this match is upheld and you are not ask the question? No.
B) You "Reject" the match and then also "Ignore" the match
1) Does Joe Bloggs know that you have ignored his tree? No. But he will see if you rejected the Match.
2) Can Joe Bloggs send you a message contesting your rejection? He can send you a message about your rejection, as a paid member he would have the option to contact you.
3) If Joe Bloggs creates another tree with Jos Smith b1850 d1942 are you:-
i) Presented with yet another chance to ignore this match? Yes.
ii) Your first choice of ignoring this match is upheld and you are not ask the question? No. "
When the deletion was queried I got
If you would like to post the summary with the information of your questions and my answers, you are more than welcome to post a new post about it to inform the community.
Thank you for your understanding.
Recently I went to some trouble to mark the trees of one member 'ignore'. The reason was simple, she had nearly twenty trees, largely if not completely the same at least with regard to matches with me. Which was an absolute pain when matching.
I was sorry I had not left one so that I actually could compare people in our trees but have since seen matches with three or four more of her trees that I must have missed in the 'ignore' process!
And I have just rejected a couple of matches for the simple reason there was almost no detail in the other tree for me to compare and confirm, in one case I think the name only. They were most likely true matches but I certainly couldn't confirm them and if I did not reject them they would sit forever in SmartMatches, to be reviewed again next time through. We really do need a 'hold' or 'maybe' box to put these in.
Anyway I sent a message with the rejection to explain the situation; probably they will do a bit more research to see if my person might be the same one so I have helped them anyway.
FOR THOSE WHO ARE JUST 'GRABBING' NUMBERS AND HITTING GREEN ....... are you also anscestry patrons....
For those of us who are seriously nterested in family history, we do Do the research.
We do search and cite references.
We don't want to know just when x was born married or died.... we also want to know how they lived.
Yes we do sometimes list people we think may be related according to BDMs
On My site I specifically have stated that informaion IS NOT FULLY CLARIFIED. but cross checking census and other sources more often then not we find we've made an error and we delete that line (sometimes that can equate to anyhwere between 10 to 500 people) ... some of you however don't.
I am really annoyed at those who have just "seen' a smart match and grabbed it, copied .... including my spelling errors.... what you don't think we check???
My Heritage.... I am equally annoyed at you... my site is supposedly PRIVATE ... why and how is the information being posted, able to be seen by others who are NOT members of my site ...why is this occurring
I am VERY offended that some of you have grabbed at a 'smart match'. i HAVE RECEIVED SMART MATCHES, GENERATED BY MY HERITAGE and some of YOU who have grabbed a match.... FOR SOME UNKNOWN PERSON WHICH HAS PHOTOS OF MY GRANDFATHER. Oh Guess what .... NO.... my grandfather doesn't have 5 children, daughters etc etc... get your facts right.
for those of you who copy and paste.... again get your facts right and check the spelling... how you managed to get the details off my site is an issue that My Heritage will have to answer to
My Heritage You Need to fix this.... and Members ...smart matches are there for you to check... not to just assimilate into your sites
You asked, " FOR THOSE WHO ARE JUST 'GRABBING' NUMBERS AND HITTING GREEN ... are you also anscestry patrons....?"
Which has me mystified -- though I go to considerable trouble to check information -- but effectively the answer for me is "Yes"; my wife is a member and I have access to ancestry through that. It has been very useful; otherwise I would almost certainly have joined MH's record finding add-on and I will probably join it anyway...
But I know there are errors in my tree.
What is needed in SmartMatching is a third classification. We have Confirmed and we have Rejected but often we are uncertain, and what do we do then? Can't confirm unless the uncertainty level is very low; and if we don't Reject, the damn thing remains forever in the bulk Unconfirmed group. To be reviewed from scratch next time we do SmartMatches, where it really is partly reviewed already.
So we need a Maybe or Not Sure or Needs Further Research or whatever group, with notice to the other party and maybe a BIG GREEN QUESTION MARK watermark in the records.